매개변수 및 사양 라운드 다운파이프

• 1.  예전에는l데코그만큼er
• Capacity: 3 tons 
• 직경 범위: 300-450mm
• 디코일링 방식: 수동형
•  
• 2.  F이드ing에게idesy성em
• Input width adjustable，Guiding system consists of several rollers, and the width between them could control by the manual rollers.
•  
• 3.  그리고in리forming sy성em

1. 매칭 소재 : GI
2. 샤프트 소재 및 직경: ￠70mm, 소재는 45#입니다.
3. 소재 두께 범위: 0.4-0.6mm
4. 주 모터 전력: 5.5kw    
5. 성형속도 : 8-10m/min     
6. 롤러 수량 : 20                                           
7. 허용오차 : 3m+-1.5mm
8. 제어 시스템:PLC
9.  전압: 380V/ 3상/ 50Hz
10. Material of forming rollers: 45# forge steel , coated with chromed treatment

• 4.Cutting motion:
• The main machine automatically stops and then cutting. After the cutting, the main machine will automatically start. Material of cutter blade: Cr12 mould steel with quenched treatment 58-62℃ Length measuring: Automatic length measuring ,Tolerance of length: +/- 1.5mm
• 5.Total weight: about 5Tons  

13. 기계 대략 크기: 길이*너비*높이 8m*1.0m*1.5m
14. 유압 시스템
15. 전력:3KW
16. PLC 제어 시스템
17. It adopts Panasonic PLC to control. The target piece’s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.

• 6.  Receivingt아브그만큼1세트

매개변수 및 사양 굽힘 기계의 :

1.본체 : 22mm 강판 용접
2. 모터 파워 : 3kw 사이클로이드 
3. transmission way: double row of chain structure with (P, 25.4)
4. Bender principle: the rack and mechanical drive way
5. control box: 1 set
6. Approx Dimensions:1.2 * 1.5 * 1.5 m