Parameters en spesifikasie van ronde aflooppyp

• 1.  Gewoond aanldekoDieer
• Capacity: 3 tons 
• Deursnee reeks: 300-450mm
• Manier van ontrol: passief
•  
• 2.  Feedingaanidesystem
• Input width adjustable，Guiding system consists of several rollers, and the width between them could control by the manual rollers.
•  
• 3.  Eninlyforming system

1. Bypassende materiaal: GI
2. Asmateriaal en deursnee: ￠70mm, materiaal is 45#
3. Materiaal dikte reeks: 0,4-0,6 mm
4. Hoofmotorkrag: 5.5kw    
5. Vormspoed: 8-10m/min     
6. Hoeveelheid rollers: 20                                           
7. Toleransie: 3m+-1,5mm
8. Beheerstelsel: PLC
9.  Spanning: 380V/ 3fase/ 50 Hz
10. Material of forming rollers: 45# forge steel , coated with chromed treatment

• 4.Cutting motion:
• The main machine automatically stops and then cutting. After the cutting, the main machine will automatically start. Material of cutter blade: Cr12 mould steel with quenched treatment 58-62℃ Length measuring: Automatic length measuring ,Tolerance of length: +/- 1.5mm
• 5.Total weight: about 5Tons  

13. masjien ongeveer grootte: L*B*H 8m*1.0m*1.5m
14. Hidrouliese stelsel
15. Krag: 3KW
16. PLC beheer stelsel
17. It adopts Panasonic PLC to control. The target piece’s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.

• 6.  Receivingtabdie1 stel

Parameters en spesifikasie van buigmasjien :

1.Liggaam: 22 mm staalplaat met sweiswerk
2.motorkrag: 3 kw cycloid 
3. transmission way: double row of chain structure with (P, 25.4)
4. Bender principle: the rack and mechanical drive way
5. control box: 1 set
6. Approx Dimensions:1.2 * 1.5 * 1.5 m