ພາລາມິເຕີແລະຂໍ້ກໍາຫນົດ ຂອງທໍ່ downpipe ຮອບ

• 1.  ເຄີຍldecoໄດ້er
• Capacity: 3 tons 
• ເສັ້ນຜ່າສູນກາງ: 300-450mm
• ວິທີການ de-coiling: passive
•  
• 2.  Fອີດingກັບidesystem
• Input width adjustable，Guiding system consists of several rollers, and the width between them could control by the manual rollers.
•  
• 3.  ແລະinລີforming system

1. ອຸປະກອນການຈັບຄູ່: GI
2. ວັດສະດຸ Shaft ແລະເສັ້ນຜ່າສູນກາງ: ￠70mm, ວັດສະດຸແມ່ນ 45#
3. ລະດັບຄວາມຫນາຂອງວັດສະດຸ: 0.4-0.6mm
4. ພະລັງງານມໍເຕີຕົ້ນຕໍ: 5.5kw    
5. ຄວາມໄວການສ້າງ: 8-10m / min     
6. ຈໍານວນ rollers: 20                                           
7. ຄວາມທົນທານ: 3m+-1.5mm
8. ລະບົບຄວບຄຸມ: PLC
9.  ແຮງດັນໄຟຟ້າ: 380V / 3phase / 50 Hz
10. Material of forming rollers: 45# forge steel , coated with chromed treatment

• 4.Cutting motion:
• The main machine automatically stops and then cutting. After the cutting, the main machine will automatically start. Material of cutter blade: Cr12 mould steel with quenched treatment 58-62℃ Length measuring: Automatic length measuring ,Tolerance of length: +/- 1.5mm
• 5.Total weight: about 5Tons  

13. ຂະໜາດເຄື່ອງ: L*W*H 8m*1.0m*1.5m
14. ລະບົບໄຮໂດຼລິກ
15. ພະລັງງານ: 3KW
16. ລະບົບຄວບຄຸມ PLC
17. It adopts Panasonic PLC to control. The target piece’s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.

• 6.  Receivingtabໄດ້1 ຊຸດ

ພາລາມິເຕີແລະຂໍ້ກໍາຫນົດ ຂອງ​ເຄື່ອງ​ບິດ​ :

1.Body: ແຜ່ນເຫຼັກ 22 ມມທີ່ມີການເຊື່ອມໂລຫະ
2.motor power: 3 kw cycloid 
3. transmission way: double row of chain structure with (P, 25.4)
4. Bender principle: the rack and mechanical drive way
5. control box: 1 set
6. Approx Dimensions:1.2 * 1.5 * 1.5 m