Parametreler ve özellikler yuvarlak iniş borusu

• 1.  Eskidenldekoriler
• Capacity: 3 tons 
• Çap aralığı: 300-450mm
• Çözülme yolu: pasif
•  
• 2.  Feedingileidesystem
• Input width adjustable，Guiding system consists of several rollers, and the width between them could control by the manual rollers.
•  
• 3.  Veinlyforming system

1. Eşleşen malzeme: GI
2. Şaft Malzemesi ve çapı: ￠70mm, malzeme 45#
3. Malzeme kalınlığı aralığı: 0.4-0.6mm
4. Ana motor gücü:5.5kw    
5. Şekillendirme hızı: 8-10m/dak     
6. Silindir sayısı: 20                                           
7. Tolerans: 3m+-1.5mm
8. Kontrol sistemi: PLC
9.  Voltaj: 380V/ 3 fazlı/ 50 Hz
10. Material of forming rollers: 45# forge steel , coated with chromed treatment

• 4.Cutting motion:
• The main machine automatically stops and then cutting. After the cutting, the main machine will automatically start. Material of cutter blade: Cr12 mould steel with quenched treatment 58-62℃ Length measuring: Automatic length measuring ,Tolerance of length: +/- 1.5mm
• 5.Total weight: about 5Tons  

13. Makine yaklaşık boyutu:U*G*Y 8m*1.0m*1.5m
14. Hidrolik sistem
15. Güç:3KW
16. PLC kontrol sistemi
17. It adopts Panasonic PLC to control. The target piece’s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.

• 6.  Receivingtabthe1 takım

Parametreler ve özellikler bükme makinesinin :

1.Gövde: Kaynaklı 22 mm çelik sac
2.motor gücü: 3 kw sikloid 
3. transmission way: double row of chain structure with (P, 25.4)
4. Bender principle: the rack and mechanical drive way
5. control box: 1 set
6. Approx Dimensions:1.2 * 1.5 * 1.5 m