ପାରାମିଟର ଏବଂ ନିର୍ଦ୍ଦିଷ୍ଟକରଣ | ଗୋଲାକାର ଡାଉନପାଇପ୍ ର |

• 1.  କୁ ବ୍ୟବହାର କରାଯାଏlଡେକୋ |Theer
• Capacity: 3 tons 
• ବ୍ୟାସ ପରିସର: 300-450 ମିମି |
• ଡି-କୋଇଲିଂର ଉପାୟ: ନିଷ୍କ୍ରିୟ |
•  
• 2.  Feedingକୁidesystem
• Input width adjustable，Guiding system consists of several rollers, and the width between them could control by the manual rollers.
•  
• 3.  ଏବଂinlyforming system

1. ମେଳ ସାମଗ୍ରୀ: GI
2. ଶାଫ୍ଟ ସାମଗ୍ରୀ ଏବଂ ବ୍ୟାସ: ￠ 70 ମିମି, ପଦାର୍ଥ ହେଉଛି 45 # |
3. ସାମଗ୍ରୀର ଘନତା ପରିସର: 0.4-0.6 ମିମି |
4. ମୁଖ୍ୟ ମୋଟର ଶକ୍ତି: 5.5kw    
5. ଗଠନ ଗତି: 8-10 ମି / ମିନିଟ୍ |     
6. ରୋଲରର ପରିମାଣ: 20                                           
7. ସହନଶୀଳତା: 3 ମି + -1.5 ମିମି |
8. ନିୟନ୍ତ୍ରଣ ପ୍ରଣାଳୀ: PLC
9.  ଭୋଲଟେଜ୍: 380V / 3phase / 50 Hz
10. Material of forming rollers: 45# forge steel , coated with chromed treatment

• 4.Cutting motion:
• The main machine automatically stops and then cutting. After the cutting, the main machine will automatically start. Material of cutter blade: Cr12 mould steel with quenched treatment 58-62℃ Length measuring: Automatic length measuring ,Tolerance of length: +/- 1.5mm
• 5.Total weight: about 5Tons  

13. ଯନ୍ତ୍ରର ପାଖାପାଖି ଆକାର: L * W * H 8m * 1.0m * 1.5m
14. ହାଇଡ୍ରୋଲିକ୍ ସିଷ୍ଟମ୍ |
15. ଶକ୍ତି: 3KW
16. PLC ନିୟନ୍ତ୍ରଣ ବ୍ୟବସ୍ଥା |
17. It adopts Panasonic PLC to control. The target piece’s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.

• 6.  Receivingtabthe1 ସେଟ୍ |

ପାରାମିଟର ଏବଂ ନିର୍ଦ୍ଦିଷ୍ଟକରଣ | ନମ୍ର ଯନ୍ତ୍ରର | :

1. ବଡି: ୱେଲଡିଂ ସହିତ 22 ମିମି ଷ୍ଟିଲ୍ ପ୍ଲେଟ୍ |
2. ମୋଟର ଶକ୍ତି: 3 kw ସାଇକ୍ଲୋଏଡ୍ | 
3. transmission way: double row of chain structure with (P, 25.4)
4. Bender principle: the rack and mechanical drive way
5. control box: 1 set
6. Approx Dimensions:1.2 * 1.5 * 1.5 m