Parameter dan spesifikasi daripada paip bawah bulat

• 1.  BiasalahldecoTheer
• Capacity: 3 tons 
• Julat diameter: 300-450mm
• Cara nyahgelung: pasif
•  
• 2.  Feedingkepadaidesystem
• Input width adjustable，Guiding system consists of several rollers, and the width between them could control by the manual rollers.
•  
• 3.  Daninlyforming system

1. Bahan padanan: GI
2. Bahan aci dan diameter: ￠70mm, bahan ialah 45#
3. Julat ketebalan bahan: 0.4-0.6mm
4. Kuasa motor utama: 5.5kw    
5. Kelajuan membentuk: 8-10m/min     
6. Kuantiti penggelek: 20                                           
7. Toleransi: 3m+-1.5mm
8. Sistem kawalan: PLC
9.  Voltan: 380V/ 3fasa/ 50 Hz
10. Material of forming rollers: 45# forge steel , coated with chromed treatment

• 4.Cutting motion:
• The main machine automatically stops and then cutting. After the cutting, the main machine will automatically start. Material of cutter blade: Cr12 mould steel with quenched treatment 58-62℃ Length measuring: Automatic length measuring ,Tolerance of length: +/- 1.5mm
• 5.Total weight: about 5Tons  

13. saiz lebih kurang mesin:L*W*H 8m*1.0m*1.5m
14. Sistem hidraulik
15. Kuasa: 3KW
16. Sistem kawalan PLC
17. It adopts Panasonic PLC to control. The target piece’s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.

• 6.  Receivingtabyang1 set

Parameter dan spesifikasi daripada mesin lentur :

1. Badan: 22 mm plat keluli dengan kimpalan
2. kuasa motor: 3 kw cycloid 
3. transmission way: double row of chain structure with (P, 25.4)
4. Bender principle: the rack and mechanical drive way
5. control box: 1 set
6. Approx Dimensions:1.2 * 1.5 * 1.5 m