Parameter ug espesipikasyon sa lingin nga downpipe

• 1.  KaniadtoldecoAnger
• Capacity: 3 tons 
• Sakup sa diametro: 300-450mm
• Paagi sa de-coiling: passive
•  
• 2.  Feedingsaidesystem
• Input width adjustable，Guiding system consists of several rollers, and the width between them could control by the manual rollers.
•  
• 3.  Uginlyforming system

1. Pagpares nga materyal: GI
2. Shaft Materyal ug diametro: ￠70mm, materyal mao ang 45 #
3. Materyal nga gibag-on range: 0.4-0.6mm
4. Panguna nga gahum sa motor: 5.5kw    
5. Pagporma sa gikusgon: 8-10m/min     
6. Gidaghanon sa mga rolyo: 20                                           
7. Pagkamatugtanon: 3m+-1.5mm
8. Sistema sa pagkontrol: PLC
9.  Boltahe: 380V / 3phase / 50Hz
10. Material of forming rollers: 45# forge steel , coated with chromed treatment

• 4.Cutting motion:
• The main machine automatically stops and then cutting. After the cutting, the main machine will automatically start. Material of cutter blade: Cr12 mould steel with quenched treatment 58-62℃ Length measuring: Automatic length measuring ,Tolerance of length: +/- 1.5mm
• 5.Total weight: about 5Tons  

13. gibana-bana nga gidak-on sa makina: L * W * H 8m * 1.0m * 1.5m
14. Hydraulic nga sistema
15. Gahum: 3KW
16. Sistema sa pagkontrol sa PLC
17. It adopts Panasonic PLC to control. The target piece’s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.

• 6.  Receivingtabang1 set

Parameter ug espesipikasyon sa bending machine :

1.Lawas: 22 mm steel plate nga adunay welding
2.motor nga gahum: 3 kw cycloid 
3. transmission way: double row of chain structure with (P, 25.4)
4. Bender principle: the rack and mechanical drive way
5. control box: 1 set
6. Approx Dimensions:1.2 * 1.5 * 1.5 m