Siga da ƙayyadaddun bayanai na zagayowar bututun ƙasa

• 1.  An yi amfani da shi donldecoTheer
• Capacity: 3 tons 
• Tsawon diamita: 300-450mm
• Hanyar de-coiling: m
•  
• 2.  Feedingkuidesystem
• Input width adjustable，Guiding system consists of several rollers, and the width between them could control by the manual rollers.
•  
• 3.  Kumainlyforming system

1. Abubuwan da suka dace: GI
2. Shaft Material da diamita: ￠70mm, abu ne 45 #
3. Material kauri kewayon: 0.4-0.6mm
4. Babban ikon mota: 5.5kw    
5. Gudun tsari: 8-10m/min     
6. Yawan rollers: 20                                           
7. Haƙuri: 3m+-1.5mm
8. Tsarin sarrafawa:PLC
9.  Wutar lantarki: 380V/ 3phase/50 Hz
10. Material of forming rollers: 45# forge steel , coated with chromed treatment

• 4.Cutting motion:
• The main machine automatically stops and then cutting. After the cutting, the main machine will automatically start. Material of cutter blade: Cr12 mould steel with quenched treatment 58-62℃ Length measuring: Automatic length measuring ,Tolerance of length: +/- 1.5mm
• 5.Total weight: about 5Tons  

13. inji girman girman:L*W*H 8m*1.0m*1.5m
14. Tsarin ruwa
15. Power: 3KW
16. PLC tsarin sarrafawa
17. It adopts Panasonic PLC to control. The target piece’s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.

• 6.  Receivingtabda1 saiti

Siga da ƙayyadaddun bayanai na injin lankwasawa :

1.Jiki: 22 mm farantin karfe tare da waldi
2.motar wutar lantarki: 3 kw cycloid 
3. transmission way: double row of chain structure with (P, 25.4)
4. Bender principle: the rack and mechanical drive way
5. control box: 1 set
6. Approx Dimensions:1.2 * 1.5 * 1.5 m