1. According to the shape of final product, Round tube and square tube are available.

2. There are two kinds of cutter. Flying saw cutting and hydraulic cutting.

3. Malakas na istraktura, mas makapal na panel ng dingding, malaking motor, malaking diameter ng baras, malaking roller, at higit pang bumubuo ng mga hilera. Chain drive, ang bilis ay 8-10m/min.

4. Diameter of round tube (70mm, 80m, 90mm), diameter of square tube (3"×4").

5. Kasama sa parehong uri ng makina ang downpipe roll forming machine, bending machine , roll forming at bending all-in-one machine at gutter roll forming machine.

Manu-manong Decoiler

Capacity: 3 tons 

Saklaw ng diameter: 300-450mm

Paraan ng de-coiling: passive

Sistema ng gabay sa pagpapakain

Input width adjustable, Guiding system ay binubuo ng ilang rollers, at ang lapad sa pagitan ng mga ito ay maaaring kontrolin ng manual rollers.

Pangunahing bumubuo ng sistema

l Matching material: GI/PPGI/color steel;

l Wall panel structure; Chain drive, frequency conversion speed regulation.

l Material thickness range: 0.3-0.8mm (Manual screw adjustment);

l Motor power: 5.5kw;

l Hydraulic station power: 7.5kw;

l Forming speed: 15m/min;      

l Quantity of rollers: about 21-26;                                         

l Shaft Material and diameter: ￠70mm, material is 45# steel;

l Tolerance: 3m+-1.5mm;

l Controlling system: PLC;

l Voltage: according to the requirment of client;

l Material of forming rollers: 45# forge steel , coated with chromed treatment;

l Cutting device

Pagkatapos mabuo, ito ay pinutol ng upper at lower bidirectional cutter oblique shear mode, at walang nabubuong basura;

Cutting knife material: Cr12 quenching treatment;

Ang cut-off power ay ibinibigay ng hydraulic station.

l Bending device

Ang aparatong ito ay maaaring yumuko sa downpipe sa kinakailangang arko, na maaaring baluktot pataas at pababa o kaliwa at kanan, at ang amag ay kailangang baguhin nang manu-mano kapag binabago ang direksyon;

Materyal ng bending die: Cr12 quenching treatment;

Ang bending power ay ibinibigay ng hydraulic station.

l Shrinking device

Maaaring bawasan ng device na ito ang downpipe port, na maginhawa para sa overlapping;

Shrinking die material: Cr12 quenching treatment;

Ang necking power ay ibinibigay ng hydraulic station