Double-out drywall channel roll forming machine 40m/min

PRODUCTS

Double-out drywall channel roll forming machine 40m/min

For: main channel, Furring channel, wall angle and etc.

Advantage:

1. Save space, can produce at same time, suitable for the small workshop.

2. 40m/min production speed, Hydraulic servo track moving cut, high precision and no speed loss.

3. High Quality, nodular Iron casting structure, Cr12 material High hardness rollers.
inquire now

Product Detail

1. Light steel keels are made of galvanized steel strips or thin steel plates rolled by cold bending or stamping. It has the advantages of high strength, good fire resistance, easy installation and strong practicality. Light steel keels are basically divided into two categories: ceiling keels and wall keels;

2. Ceiling keels are composed of load-bearing keels, covering keels and various accessories. The main keels are divided into three series: 38, 50 and 60. 38 is used for non-walkable ceilings with a hanging point spacing of 900~1200 mm, 50 is used for walkable ceilings with a hanging point spacing of 900~1200 mm, and 60 is used for walkable and weighted ceilings with a hanging point spacing of 1500 mm. The auxiliary keels are divided into 50 and 60, which are used in conjunction with the main keels. The wall keels are composed of cross keels, cross bracing keels and various accessories, and there are four series: 50, 75, 100 and 150.

Our machine can produce two different keels at the same time, saving space, independent motor and material rack, suitable for users with small workshop area。

Process(Layout)

Decoiler with Leveling device→Servo feeder→Punching machine→feeding device→Roll forming machine→Cutting Part→Conveyer roller table→Automatic stack machine→Finished product.

Processes and components

5 tons hydraulic decoiler with leveing device	1 set
80 ton Yangli punching machine with servo feeder	1 set
Feeding device	1 set
Main roll forming machine	1 set
Hydraulic track moving cut device	1 set
Hydraulic station	1 set
Automatic stack machine	1 set
PLC Control system	1 set

Basic Specification

No.	Items	Spec:
1	Material	Thickness: 1.2-2.5mm Effective width: According to drawing Material: GI/GL/CRC
2	Power supply	380V, 60HZ, 3 Phase(or customized)
3	Capacity of power	Motor power: 11kw*2; Hydraulic station power: 11kw Lift servo motor: 5.5kw Translation servo motor: 2.2kw Trolley motor: 2.2kw
4	Speed	0-10m/min
5	Quantity of rollers	18 rollers
6	Control system	PLC control system; Control panel: Button-type switch and touch screen;
7	Cutting type	Hydraulic track moving cutting
8	Dimension	Approx.(LHW) 40mx2.5mx2m

Related Products

Double out drywall and ceiling channel roll forming machine

The ceiling keel, which we often see, especially the modeling ceiling, is made of keel as a frame

Double-out drywall channel roll forming machine 40m/min

For: main channel, Furring channel, wall angle and etc.

Advantage:

1. Save space, can produce at same time, suitable for the small workshop.

2. 40m/min production speed, Hydraulic servo track moving cut, high precision and no speed loss.

3. High Quality, nodular Iron casting structure, Cr12 material High hardness rollers.

70m/min drywall roll forming machine with four punching stations

70m/min drywall roll forming machine with four punching stations, it's the highest configurations in China, and the fastest speed drywall machine in China.

40m/min drywall roll forming machine are poppular

The overall body is well finishing, and the guide torrist structure is strong and durable.

Home

Products

Cases

360° Virtual Tour

News

AboutUs

Contact

SHIJIAZHUANG YINGYEE MACHINERY CO.,LTD

Products

About

Video

+86-0311-85415145
+86 186 0326 5521

info@yingyee.cn

Ms. Jessica Tian