Name: Supermarket shelf layer and back panel line
Brand: Please contact the optimization engineer - Professional Purling Roll Forming Machine Manufacturer and Supplier
Availability: InStock
Rating: 4.5 (89 reviews)

Supermarket shelf layer and back panel line

The main technical standards followed1.1 GB/T6725-2002 "Technical Specifications for

جۇڭگو ساندۋىچ تاختىسى
ئۆگزە تاختىسى دومىلىما شەكىللەندۈرۈش ماشىنىسى
ئۆگزە تام تاختىسىنى دومىلىتىش ماشىنىسى
ئۆگزە تاختىسى ماشىنىسى
ساندۋىچ تاختىسى ئىشلەپچىقىرىش
قۇياش ئېنىرگىيىسى قۇرۇلۇشى
تۇراقلىق ئارخىپ دومىلىما شەكىللەندۈرۈش ماشىنىسى
تۇرۇبا زاۋۇتى ئىشلەپچىقىرىش لىنىيىسى
تام تاختىسى ماشىنىسى
تام تاختىسىنى دومىلىتىش ماشىنىسى
ھازىر سۈرۈشتۈرۈڭ

مەھسۇلات تەپسىلاتى

The main technical standards followed
1.1 GB/T6725-2002 "Technical Specifications for Cold-Formed Thin-walled Steel"
1.2 GB/T6728-200 "Dimensions, appearance, weight and allowable deviation of cold-formed hollow steel for structures"
1.3 GB6723-86 "General cold-formed open section steel size, shape, weight and allowable deviation"
1.4 GB/709-88 "Dimensions, shapes, weights and allowable deviations of hot-rolled steel sheets and strips"
1.5 GB/708-88 "Dimensions, shapes, weights and allowable deviations of cold-rolled steel sheets and strips"
Basic production conditions of equipment
2. Equipment production conditions:
2.1 The equipment covers an area: 30×3×2 (length×width×height) meters.
2.2 Equipment feeding direction: left in and right out.
2.3 Voltage parameter 380, 50Hz, 3 phases.
2.4 Air source: the flow rate is 0.5m³/Min; the pressure is 0.7MPa.
2.5 Hydraulic oil: 46# hydraulic oil.
2.6 Gear oil: 18# hyperbolic gear oil.
Main technical parameters of the equipment
3.2.1 Rolled strip width: ≤775mm
3.2.2 Rolled strip thickness: 0.6mm/0.9mm
3.2.3 Rolled strip material: cold-rolled steel strip yield limit σs≤260Mpa
3.2.4 Roll material: Cr12, quenched HRC56°-60°
3.2.5 Molding speed: 0~12m/min, online speed 0-6 M/min
3.2.6 Rolled workpiece length: user free setting
3.2.8 Total installed capacity of equipment: about 30KW.
Processing

china sandwich panel

No	Component name	Models and specifications	Set	Remark
1	Decoiler	T-500	1
2	تەكشىلىك ماشىنىسى	HCF-500	1	Active
3	Servo يەم-خەشەك ماشىنىسى	NCF-500	1	Dual-use
4	مۇشتلاش سىستېمىسى	Multi-station four-post type	1	Hydraulic
5	رول شەكىللەندۈرۈش ماشىنىسى	Cantilever quick adjustment type	2	Frequency Control
6	Cutting and folding machine	Tracking type	1	Combination
7	جەدۋەلنى قوبۇل قىلىش	Roll type	1
8	Hydraulic system	High speed	2
9	ئېلېكتر كونترول سىستېمىسى	PLC	2
10	Convery system	Roll type	1	For Fundo 1