Main Tee size is 1220mm or 1200mm, Cross Tee size is 610mm or 600mm.
The speed of Main Tee machine and Cross Tee machine is 25m/min. The speed of Wall angle machine is 40m/min.
Main Tee machine is cutting first and then punching holes. Cross Tee machine is punching the holes on both sides with two punching devices first and then cutting.
Main Tee machine and Cross Tee machine are servo tracking cutting, fully automatic mould punching. Punching and cutting are accurate, precise hole spacing, perfect bonding.
The forming roller has high machining accuracy, and the roller use material as Cr12 with high precision work, heat treatment, uselife is more than 10 years.
Fully automatic processing, saving labors, no material loss.
The machine structure is torrist stand, much stronger, has long service life.
The machine has high precision, simple debugging, and less waste of raw materials, which greatly saves costs (because the raw materials of the T-ceiling are more expensive).
Si Yingyee ay may karanasan sa mga inhinyero kung paano haharapin ang pag-install at iba pang mga isyu.
