search
Close
lbanner
NEWS
home location: HOME > NEWS

Nov . 17, 2026 00:24 Back to list

Hydraulic Thread Rolling Machine Price: Match the Z28-200 to Your Work



Hydraulic thread rolling machine price depends on the working diameter, roller pressure, thread form, material range, power setup, and control requirements. The Z28-200 suits production of external regular, trapezoid, and modulax threads on compatible metals within its 16~80mm working diameter.

Hydraulic Thread Rolling Machine Price: Match the Z28-200 to Your Work
Illustration for reference; see the product page for actual photos and specifications.

16~80mm

Working diameter

200KN

Maximum roller pressure

8mm

Maximum thread distance

220mm

Maximum roller diameter

Hydraulic thread rolling machine price should be compared against the work the machine must complete. For the Z28-200, the useful checks are material compatibility, working diameter, thread form, forming pressure, power supply, and the way the machine will fit your production line.

Match the machine to the part range

The Z28-200 is designed for external threads on carbon steel, alloy steel, and non-ferrous metals with elongation over 10% and tensile strength below 100kgf/mm2. Its working diameter is 16~80mm, so your largest and smallest regular production parts should sit inside that range.

The machine can produce regular, trapezoid, and modulax threads. That makes it a practical choice for a line that handles more than one external thread form. Confirm the thread profile and blank dimensions before asking for a price so the quotation matches the actual tooling and setup.

Compare the price-driving machine parameters

The Z28-200 has a maximum roller pressure of 200KN and a maximum roller diameter of 220mm. Its maximum thread distance is 8mm, and its maximum roller width is 180mm. These parameters connect the machine price to the size and forming requirements of your parts.

ParameterZ28-200 valueWhy it matters when comparing a quote
Working diameter16~80mmSets the compatible part diameter range
Maximum roller pressure200KNIndicates the available forming pressure
Maximum thread distance8mmHelps match the required thread geometry
Maximum roller diameter220mmDefines the largest supported roller size
Maximum roller width180mmHelps match the required rolling width
Rolling power11kwIdentifies the main rolling power requirement
Hydraulic power5.5kwIdentifies the hydraulic power requirement

Use the same part drawings, thread forms, material information, and production targets when comparing offers. A lower quoted figure may describe a different configuration if these inputs are not held constant.

Check the hydraulic and control arrangement

The Z28-200 uses hydraulic cutting mode and a PLC control system. The hydraulic system matters when your process requires the stated cutting arrangement, while PLC control suits production that needs repeatable control of the rolling process.

The main shaft dip angle is ±15°, and the main shaft rotary speeds are 20.25.41.51.64(r/min). Include these operating requirements in your technical request so the supplier can match the machine configuration to your process.

Standard power is 380V/3Phase/50Hz, with customization available for local power grid requirements. Measure your available power connection before ordering and state the required voltage, phase, and frequency in the quotation request.

Our advice

Select the Z28-200 when your part range and thread forms fit its working diameter, pressure, roller dimensions, and hydraulic power arrangement. Send the supplier part, material, thread, and power details for a configuration-matched quotation.

What to weigh

Part fitConfirm material, elongation, tensile strength, and 16~80mm working diameter.
Thread workMatch regular, trapezoid, or modulax threads and the 8mm thread distance.
Machine capacityCompare 200KN pressure, roller dimensions, and 11kw rolling power.
IntegrationCheck 5.5kw hydraulic power, PLC control, and 380V/3Phase/50Hz supply.

Your shortlist

Z28-200 thread rolling machineFor compatible external-thread work within the 16~80mm working diameter.

Choose the Z28-200 for this production situation

Choose the Z28-200 thread rolling machine when your production needs external regular, trapezoid, or modulax threads on compatible carbon steel, alloy steel, or non-ferrous metal parts within a 16~80mm working diameter. Its 200KN maximum roller pressure and PLC control system fit a production decision centered on controlled cold forming and repeatable external-thread work.

Before requesting the hydraulic thread rolling machine price, send the supplier your material type, material strength and elongation, part diameter range, thread form, maximum thread distance, required roller dimensions, and local power details. Ask the quotation to identify the matching machine parameters and included configuration.

The company

SHIJIAZHUANG YINGYEE MACHINERY CO.,LTD

YingYee Machinery and Technology Service Co., Ltd. is specialized in metal process equipments. We focus on international market and abide by international business rules and regulations strictly. Our team is strong in design, research, sale and service in metal process equipment. Our reputation and reliability are solid, thanks to customer feedbacks and their returning for more business.

About Us ↗Visit company website ↗

Next:

This is the last article

What can we do to help you?