ການປະມວນຜົນ:
Coil loading (manual) → uncoiling → leveling → feeding (servo) → angle punching / logo punching → cold roll forming → cutting forming → discharging
Eອຸປະກອນ ອົງປະກອບ
| ບໍ່ | ຊື່ອົງປະກອບ | ແບບຈໍາລອງແລະຂໍ້ກໍາຫນົດ | ຕັ້ງ | ຂໍ້ສັງເກດ |
| 1 | ເຄື່ອງຊັກຜ້າ | T-500 | 1 |
|
| 2 | ເຄື່ອງປັບລະດັບ | HCF-500 | 1 | ເຄື່ອນໄຫວ |
| 3 | ເຄື່ອງປ້ອນ Servo | NCF-500 | 1 | ໃຊ້ສອງເທົ່າ |
| 4 | ລະບົບ punching | ປະເພດສີ່ໄປສະນີຫຼາຍສະຖານີ | 1 | ໄຮໂດລິກ |
| 5 | ມ້ວນເຄື່ອງກອບເປັນຈໍານວນ | ປະເພດການປັບໄວ Cantilever | 1 | ການຄວບຄຸມຄວາມຖີ່ |
| 6 | ເຄື່ອງຕັດແລະພັບ | ປະເພດການຕິດຕາມ | 1 | ການປະສົມປະສານ |
| 7 | ຕາຕະລາງຮັບ | ປະເພດມ້ວນ | 1 |
|
| 8 | ລະບົບໄຮໂດຼລິກ | ຄວາມໄວສູງ | 2 |
|
| 9 | ລະບົບຄວບຄຸມໄຟຟ້າ | PLC | 2 |
|
| 10 | ລະບົບແປງ | ປະເພດມ້ວນ | 1 | ສໍາລັບກອງທຶນ 1 |
--------------------------------------------------------------------------------------------------
Basicspecification
| No. | Items | Spec: |
| 1 | ວັດສະດຸ | 1. Thickness: 0.6mm 2. Input width: max. 462mm 3. material: Cold rolled steel strip; yield limit σs≤260Mpa |
| 2 | Power supply | 380V, 60Hz, 3 phase |
| 3 | Capacity of power | 1. Total power: about 20kW 2. Punchine system power: 7.5kw 3. Roll forming machine power: 5.5kw 4. Track cutting machine power: 5kw |
| 4 | ຄວາມໄວ | ຄວາມໄວສາຍ: 0-9m / min (ລວມທັງ punching) ຄວາມໄວການສ້າງ: 0-12m / min |
| 5 | ນ້ຳມັນໄຮໂດລິກ | 46# |
| 6 | ນ້ຳມັນເກຍ | 18# Hyperbolic gear oil |
| 7 | ຂະໜາດ | Approx.(L*W*H) 20m×2m×2m |
| 8 | ຢືນຂອງ rollers | Roll forming machine for Fundo 2F: 17 rollers One Extra roller Fundo 1F: 12 rollers |
| 9 | ວັດສະດຸຂອງ rollers | Cr12, quenched HRC56°-60° |
| 10 | ຄວາມຍາວຂອງ workpiece ມ້ວນ | ຜູ້ໃຊ້ການຕັ້ງຄ່າຟຣີ |
| 11 | Cut style | Hydraulic Tracking cut |
ການຜະລິດອັດຕະໂນມັດຂອງລົດໄຟ DIN ໄຟຟ້າ, ໃຊ້ແຖບ galvanized ເພື່ອຜະລິດ.
Automatic size changing Automatic folding automatic transfer and combining Line speed: 20m/min Only need one…
One machine can do different size of beam, save space, save worker, save money, full…
Drip eaves refer to a type of building structure in the construction of a house…
The ceiling keel, which we often see, especially the modeling ceiling, is made of keel…
For: main channel, Furring channel, wall angle and etc. Advantage: 1. Save space, can produce…
Speed: 40m/min 1200(1220) and 600(610) type produced in one machine. Tracking move 5 punch and…
1. High production capacity. 2. independent punching device with servo motor high precision for punching.…
1. 10m/min or 20m/min different speed can be choose. 2. Automatic size changing or Change…