3T hydraulic  de-coiler with leveling

Matsakaicin nisa na albarkatun kasa: Dangane da bayanin martaba

Yawan aiki: 3000kgs

Diamita na ciki na nada: 450-600mm

Leveling: sanya kayan lebur da santsi.

Punching machine with servo feeder

Ikon naushi: 40T

Na'ura mai naushi tare da nau'ikan naushi na zaɓi.

Buga rami bisa ga zane

Servo feeder yana aiki tare da mai ciyar da servo

roll forming machine

Material kauri kewayon: 1.0-1.5mm                                 

Babban tashar wutar lantarki: 5.5kw * 2, ikon tashar ruwa7.5kw                                   

Gudun tsari:12m/min                                                                     

Quantity of rollers:12 rollers

Shaft Material da diamita: ￠70 mm, abu ne 45 # karfe  

Haƙuri: 10m+-1.5mm

Driven by chain, set pinhole to avoid half hole.

Yanke

1.Cutting motsi: Babban injin yana tsayawa ta atomatik sannan yanke. Bayan yanke, babban injin zai fara ta atomatik.  

2.Material na ruwa: CR12 tare da maganin zafi

3.Length aunawa: Tsawon tsayi ta atomatik

4.Hydraulic ikon 7.5 kw

PLC tsarin sarrafawa

Ma'aunin tsayi ta atomatik:

Ma'aunin yawa ta atomatik: Kwamfuta da ake amfani da ita don sarrafa tsayi & yawa. Na'ura za ta yanke ta atomatik zuwa tsayi kuma ta tsaya lokacin da aka sami adadin da ake buƙata

Control panel: Button-type canzawa da tabawa

Nau'in tsayi: millimeter (an canza a kan kwamitin kulawa)