Drawings and Sizes
C Purlin machine:
a: 80-300mmb: 35-80mm c: 10-25mm T: 1.5-3mm
Z Purlin machine:
a: 120-300mm b: 35-80mm c:10-25mm T: 1.5-3mm
Working Process:
| NAME | DESCRIPTION |
| 5 tons manual de-coiler
| Inner dia: Ø440mm– Ø560mmMax input feeding: 600mm Capacity: 5Tons coil outer diameter max 1500 mm |
| Straighten device | 11 rollers for straighten 5 up and 6 down. |
| Hydraulic Holes device | Standard holes: 2 double holes and 1 single holeEach punching cylinder control each 2 holes for sides or single hole in the middle Distance flexible: a channel for the holes, the distance can operate by manual Hole size flexible: to change the punching dies to change the size. The width distance between holes adjustable manual .it can’t control by PLC. The length distance between holes ,it can adjust by PLC. |
| Hydraulic Pre-cut device | Hydraulic Power, driven with gear |
| Main forming system
| Main power: 22kw6 electronic motors auto adjust size. Frame： 500mm H frame steel Forming speed: 18-20m/min Shaft material and diameters: #45 steel and fit side 65mm. Flexible side: 85mm Roller material: Gcr15. the hardness is HRC 52-55 Steps: 15-18 steps for forming All size change by PLC. All parameter set from the PLC control system C/Z change, by manual change the rollers discretion Machine size: L*W*H 11.5m*1.6m*1.4m (approx size. correct size will be known when machine ready) Machine weight about 12Tons Voltage: 380V/ 3phase/ 50 Hz(as customer require ) Driven way:Chain |
| All-size-in-one cut system
| Hydraulic cutting systemMaterial: Gcr12mov. All size in one blade |
| Control system PLC | Control the quality&punching length &cutting length automaticallyIn English language The machine will be stopped while it is punching and cutting PLC must be able to keep in memory which profiles are inside machine even after the machine stopped Automatic length measures and quantity counting. Program batches with different profile lengths with no waste Size of PLC about 700(L)*1000(H)*300(W) Encode: OMRON PLC : KAUTO (now auto adjust size only this brand) Solenoid valve: YUKEN (TAIWAN) Frequency converter: DELTA Touch screen :WEINVIEW (TAIWAN) All connections to the machine and to PLC control Board are strong |
Automatic production of Electric DIN Rail, use galvanized strip to produce.
Automatic size changing Automatic folding automatic transfer and combining Line speed: 20m/min Only need one…
One machine can do different size of beam, save space, save worker, save money, full…
Drip eaves refer to a type of building structure in the construction of a house…
The ceiling keel, which we often see, especially the modeling ceiling, is made of keel…
For: main channel, Furring channel, wall angle and etc. Advantage: 1. Save space, can produce…
Speed: 40m/min 1200(1220) and 600(610) type produced in one machine. Tracking move 5 punch and…
1. High production capacity. 2. independent punching device with servo motor high precision for punching.…
1. 10m/min or 20m/min different speed can be choose. 2. Automatic size changing or Change…
