L'infurmazioni basi di sta macchina cum'è seguente:
- Spessore di i materiali: 0,5-1,2 mm
- Velocità: 5-12 m/min
- Capacity of power:Main power: 15kw; Hydraulic station: 11 kw; Servomotore: 2 kw
- Occupazione di a terra di a macchina:Circa (L * W * H) 26 m * 1,5 m * 1,5 m
Per questa linea di produzzione, u layout hè u seguente: Decoiler--Punching idraulicu---Formazione di rotuli--Fly sega taglio--Ricevutu
- Materiale abbinabile: bobina di strisce galvanizzate
- Materialthickness: 5-1.2mm
- Potenza: 15 kW
- Formingspeed: 5-12m/min
- Thewidth of the plates: according to the drawings.
- Rollstations: 20 rolls/ cassette, in total 4 cassette.
- Roller Material: GCR15, HRC55-62°. high strength, high hardness, high precision and high service life.
- ShaftMaterial and diameter: 45#steel; ¢55mm,
- Corpu di a macchina: una piastra d'acciaio di 8 mm di spessore hè saldata integralmente
- Struttura: Casting Iron Torrist
- Tolleranza:
Straightness: ≤± 1.5mm/1500 mm
Angular ≤± 1.5mm/1000 mm
Length: 10m±1.5mm
- Wayof drive: chain driven
- Controllingsystem: PLC
Tensione: 380V, 50HZ, 3Phase (o persunalizatu)
