Main Tee size is 1220mm or 1200mm, Cross Tee size is 610mm or 600mm.
The speed of Main Tee machine and Cross Tee machine is 25m/min. The speed of Wall angle machine is 40m/min.
Main Tee machine is cutting first and then punching holes. Cross Tee machine is punching the holes on both sides with two punching devices first and then cutting.
Main Tee machine and Cross Tee machine are servo tracking cutting, fully automatic mould punching. Punching and cutting are accurate, precise hole spacing, perfect bonding.
The forming roller has high machining accuracy, and the roller use material as Cr12 with high precision work, heat treatment, uselife is more than 10 years.
Fully automatic processing, saving labors, no material loss.
The machine structure is torrist stand, much stronger, has long service life.
The machine has high precision, simple debugging, and less waste of raw materials, which greatly saves costs (because the raw materials of the T-ceiling are more expensive).
Yingyee has experienced engineers know how to deal with installation and other issues.
Automatic production of Electric DIN Rail, use galvanized strip to produce.
Automatic size changing Automatic folding automatic transfer and combining Line speed: 20m/min Only need one…
One machine can do different size of beam, save space, save worker, save money, full…
Drip eaves refer to a type of building structure in the construction of a house…
The ceiling keel, which we often see, especially the modeling ceiling, is made of keel…
For: main channel, Furring channel, wall angle and etc. Advantage: 1. Save space, can produce…
Speed: 40m/min 1200(1220) and 600(610) type produced in one machine. Tracking move 5 punch and…
1. High production capacity. 2. independent punching device with servo motor high precision for punching.…
1. 10m/min or 20m/min different speed can be choose. 2. Automatic size changing or Change…