Ubungakanani obuzenzekelayo bokutshintsha umqadi wokugcina umatshini wokwenza umatshini wokusonga ngokuzenzekelayo kunye nenkqubo yokudibanisa

Wenza ntoni uvimba wangaphambili? Yintoni enokuyenza ngebhokisi yebhokisi?

Iindawo zokugcina iimpahla ezingaphambili ziqeshwa ngokubanzi kwiivenkile zasekuhlaleni okanye kwiindawo ezincinci zokugcina iimpahla (200 ukuya kwi-500 square metres). Zakhiwe ngokuxineneyo kuluntu apho abahlali bahlala khona (ngokuqhelekileyo kwiikhilomitha ezi-3), kwaye ukutya okutsha kunye nempahla yabathengi ehamba ngokukhawuleza igcinwa ngokuthe ngqo kwiishelufu / kwindawo yokugcina efrijini. Kwindawo yokugcina impahla, abakhweli banoxanduva ekugqibeleni lokuhambisa kubathengi, ngakumbi ukuhlangabezana neemfuno zabathengi phakathi ukuya kwizixeko eziphakamileyo ukuze zilungele (okukhawulezayo) kunye nokutya okunempilo (okulungileyo) okutsha kunye neemfuno zemihla ngemihla. Iibhokisi zebhokisi kunye nezinye iikholomu zeshelufu zensimbi zezona mveliso ziphambili zokubeka iimveliso zabo kunye neemveliso zokuthengisa, kwaye ziyimveliso eyimfuneko kwikhonkco lemveliso yoontanga.

Icandelo lezixhobo

• 3 ton Decoiler(hydraulic)                     x1set
• Feeding guide system                       x1set
• Umatshini wokwenza umqulu ongundoqo(Utshintsho lwesayizi oluzenzekelayo)x1iseti
• Automatic Punching system        x1set
• Hydraulic cutting system                         x1set
• Hydraulic station                                x1set
• PLC Control system                             x1set
• Automatic transfer and folding systemx1 set

 

Iiparameters zomatshini wokwenza umqulu ongundoqo

• Izinto ezihambelanayo: i-CRC, i-Galvanized Strips.
• Ubukhulu: Max 1.5mm
• Amandla aphambili: Ukuchaneka okuphezulu kwe-servo motor*3.
• Isantya sokwenza: ngaphantsi kwe-10m / min
• Amanyathelo Roller: 13steps;
• Izinto zeshaft: 45 #steel;
• Ububanzi be-shaft: 70mm;
• Izinto eziphathekayo ze-Roller: CR12;
• Ubume bomatshini: Isakhiwo seTorrist
• Indlela yokuqhuba: Ibhokisi yegiya
• Indlela yokulungelelanisa ubungakanani: ngokuzenzekelayo, ulawulo lwe-PLC;
• Inkqubo yokubetha ngokuzenzekela;
• Umsiki: I-hydraulic cut
• Izinto eziphathekayo zeblade yokusika: Cr12 intsimbi yokubumba enonyango olucinyiweyo 58-62 ℃
• Ukunyamezela: 3m + -1.5mm

Umbane: 380V/ 3phase/ 60 Hz (okanye ngokwezifiso);

 

Umatshini odibeneyo

• Ukuma kweerola: 5stands (isakhiwo seTorrist)
• Ibhokisi yegiya eqhutywa
• Main motor power:11 KW
• Izinto eziziirola:Cr12
• Ububanzi beerola eziphambili: 75mm
• Indlela yokusebenza: ukondla ngesandla

Ulawulo: kulawulwa ngesandla

PLC control and touching screen(zoncn)

• Voltage, Frequency, Phase: 380V/ 3phase/ 60Hz(okanye ngokwezifiso)
• Umlinganiselo wobude ozenzekelayo:
• Umlinganiselo wobungakanani ozenzekelayo
• Ikhompyuter esetyenziselwa ukulawula ubude nobungakanani. Umatshini uya kusika ngokuzenzekelayo ubude kwaye uyeke xa ubuninzi obufunekayo bufunyenwe
• Ubude obungachanekanga bunokulungiswa ngokulula
• Iphaneli yokulawula: Iqhosha lohlobo lokutshintsha kunye nesikrini sokuchukumisa

Iyunithi yobude: imilimitha (itshintshiwe kwiqela lolawulo)