Gaýtadan işlemek:
Coil loading (manual) → uncoiling → leveling → feeding (servo) → angle punching / logo punching → cold roll forming → cutting forming → discharging
Eibermek komponenti
| .Ok | Komponentiň ady | Modeller we aýratynlyklar | Set | Bellik |
| 1 | Bezeg | T-500 | 1 |
|
| 2 | Düzelýän maşyn | HCF-500 | 1 | Işjeň |
| 3 | Servo iýmitlendiriji maşyn | NCF-500 | 1 | Iki gezek ulanmak |
| 4 | Punch ulgamy | Köp stansiýaly dört postly görnüş | 1 | Gidrawlik |
| 5 | Rulon emele getiriji maşyn | Kantileweriň çalt düzediş görnüşi | 1 | Quygylyga gözegçilik |
| 6 | Kesiji we bukulýan maşyn | Gözlegiň görnüşi | 1 | Kombinasiýa |
| 7 | Tablisa | Rulonyň görnüşi | 1 |
|
| 8 | Gidrawlik ulgamy | Speedokary tizlik | 2 |
|
| 9 | Elektrik dolandyryş ulgamy | PLC | 2 |
|
| 10 | Eltip bermek ulgamy | Rulonyň görnüşi | 1 | 1-nji fond üçin |
--------------------------------------------------------------------------------------------------
Basicspecification
| No. | Items | Spec: |
| 1 | Material | 1. Thickness: 0.6mm 2. Input width: max. 462mm 3. material: Cold rolled steel strip; yield limit σs≤260Mpa |
| 2 | Power supply | 380V, 60Hz, 3 phase |
| 3 | Capacity of power | 1. Total power: about 20kW 2. Punchine system power: 7.5kw 3. Roll forming machine power: 5.5kw 4. Track cutting machine power: 5kw |
| 4 | Tizlik | Çyzygyň tizligi: 0-9m / min (urmagy goşmak bilen) Formanyň tizligi: 0-12m / min |
| 5 | Gidrawlik ýagy | 46# |
| 6 | Diş ýagy | 18# Hyperbolic gear oil |
| 7 | Ölçegi | Approx.(L*W*H) 20m×2m×2m |
| 8 | Rolikleriň stendleri | Roll forming machine for Fundo 2F: 17 rollers Bir goşmaça rolik Fundo 1F: 12 rolik |
| 9 | Rolikleriň materialy | Cr12, quenched HRC56°-60° |
| 10 | Aýlanan iş böleginiň uzynlygy | Ulanyjy mugt sazlama |
| 11 | Cut style | Hydraulic Tracking cut |
Elektrik DIN demir ýolunyň awtomatiki öndürilmegi, öndürmek üçin galvanizli zolak ulanyň.
Automatic size changing Automatic folding automatic transfer and combining Line speed: 20m/min Only need one…
One machine can do different size of beam, save space, save worker, save money, full…
Drip eaves refer to a type of building structure in the construction of a house…
The ceiling keel, which we often see, especially the modeling ceiling, is made of keel…
For: main channel, Furring channel, wall angle and etc. Advantage: 1. Save space, can produce…
Speed: 40m/min 1200(1220) and 600(610) type produced in one machine. Tracking move 5 punch and…
1. High production capacity. 2. independent punching device with servo motor high precision for punching.…
1. 10m/min or 20m/min different speed can be choose. 2. Automatic size changing or Change…