1. Size of finished products: Main Tee size is 1220mm or 1200mm, Cross Tee size is 610mm or 600mm.
  2. Making processing: Main Tee machine is cutting first and then punching holes. Cross Tee machine is punching the holes on both sides with two punching devices first and then cutting.
  3. The speed of Main Tee machine and Cross Tee machine is 25m/min. The speed of Wall angle machine is 40m/min.

  4. The machine has high precision, simple debugging, and less waste of raw materials, which greatly saves costs (because the raw materials of the T-ceiling are more expensive).

  5. Main Tee machine and Cross Tee machine are servo tracking cutting, fully automatic mould punching. Punching and cutting are accurate, precise hole spacing, perfect bonding.

  6. The forming roller has high machining accuracy, and the roller use material as Cr12 with high  precision work, heat treatment, uselife is more than 10 years.

Share
Published by

Recent Posts

විදුලි රේල් රෝල් සාදන යන්ත්‍රය DIN රේල් රෝල් සාදන යන්ත්‍රය

Electric DIN Rail ස්වයංක්‍රීයව නිෂ්පාදනය කිරීම, නිෂ්පාදනය කිරීමට ගැල්වනයිස් කරන ලද තීරුව භාවිතා කරන්න.

මාස 10ක් ago