De plafondkiel, die we vaak zien, met name het modelplafond, is gemaakt van kiel als frame en vervolgens bekleed met gipsplaat. Kiel verwijst naar het hoofdmateriaal gemaakt van licht staal en gebruikt voor plafonds.
The ceiling keel system is equipped with a special hoisting system, and the light steel keel used for the ceiling includes a bearing keel, a covered keel, a hanging piece, a pendant, a hanging insert, a bearing keel connector, a covered keel connector, a lifting bar, and the primary and secondary keel is a light steel keel. The aluminum plate is a portal detachable keel system, and each panel can be easily disassembled, assembled and restored. The tubes can be disassembled independently. The boom is Φ8mm, and the surface of the boom and bolt is chemically blackened, and its anti-corrosion performance should be higher than the building standard. The ceiling keel and accessories are made of galvanized steel plate (belt) as raw material (thin-walled section steel produced by cold forming process), and the national standard 1.5mm thick galvanized steel plate (belt) "Bending Test Method for Metal Materials" (GB/T 232-2010), roll forming, forming cross-section size of 15mm×50mm×15mm. Hot-dip galvanizing on the surface of the keel "Technical Requirements and Test Methods for Hot-dip Galvanized Layer of Metal Covering Layer for Iron and Steel Parts" (CB/T13912--2002), the amount of double-sided galvanizing reaches 120 The surface is sprayed with black electrostatic powder.
Machineparameters
| Apparatuurcomponent (één machine) | l Double head 3 Tons Manual de-coiler*1 l Voedingsgeleidingssysteem*2 l Voornamelijk vormend systeem (Chian-gestuurd)*2 l Hydraulic cutting system(Track cutting) *2 l Hydraulisch station*2 l PLC Control system *2 l Uitlooptafel*2 |
| Materiaal | Thickness: 0.3-0.6mm Material: GI, GL. |
| Power supply | 380V, 50Hz, 3 phase(Or customized) |
| Capacity of power | Roll forming machine main power: 5.5kw*4 Servermotor: 2,2 kW*4; hydraulisch: 3,0 kW*4; |
| Snelheid | Lijnsnelheid: 40 m/min |
| Dimensie | Ongeveer (L*B*H) 5m*1,5m*1,3m (één machine) Totale lengte: 10-12 meter inclusief de afwikkelaar en ontvangsttafel. |
| Stands van rollen | 10-12 rollen |
Automatische productie van elektrische DIN-rails, gebruik van gegalvaniseerde strip voor de productie.
Automatic size changing Automatic folding automatic transfer and combining Line speed: 20m/min Only need one…
One machine can do different size of beam, save space, save worker, save money, full…
Drip eaves refer to a type of building structure in the construction of a house…
For: main channel, Furring channel, wall angle and etc. Advantage: 1. Save space, can produce…
Speed: 40m/min 1200(1220) and 600(610) type produced in one machine. Tracking move 5 punch and…
1. High production capacity. 2. independent punching device with servo motor high precision for punching.…
1. 10m/min or 20m/min different speed can be choose. 2. Automatic size changing or Change…
Cut to length line for multiple materials with high accurate work. This production line can…