Fanodinana:
Coil loading (manual) → uncoiling → leveling → feeding (servo) → angle punching / logo punching → cold roll forming → cutting forming → discharging
Efitaovana singa fototra
| tsy misy | Anaran'ny singa | Modely sy ny fepetra arahana | Set | fanamarihana |
| 1 | Decoiler | T-500 | 1 |
|
| 2 | Machine leveling | HCF-500 | 1 | Active |
| 3 | Masinina servo feeder | NCF-500 | 1 | lafiny roa-fampiasana |
| 4 | Rafitra punching | Karazana toby efatra misy toby maromaro | 1 | Hydraulic |
| 5 | milina fanaovana roll | Karazana fanitsiana haingana cantilever | 1 | Fanaraha-maso matetika |
| 6 | Machine manapaka sy miforitra | Karazana fanaraha-maso | 1 | mitambatra |
| 7 | Fandraisana latabatra | Karazana horonana | 1 |
|
| 8 | rafitra hydraulic | Haingam-pandeha | 2 |
|
| 9 | Rafitra fanaraha-maso elektrika | PLC | 2 |
|
| 10 | Convery system | Karazana horonana | 1 | Ho an'ny Fonds 1 |
--------------------------------------------------------------------------------------------------
Basicfamaritana
| Tsia. | IREO SINGA NASIANA | Spec: |
| 1 | KEVITRA | 1. Thickness: 0.6mm 2. Input width: max. 462mm 3. material: Cold rolled steel strip; yield limit σs≤260Mpa |
| 2 | Power supply | 380V, 60Hz, 3 phase |
| 3 | Capacity of power | 1. Total power: about 20kW 2. Punchine system power: 7.5kw 3. Roll forming machine power: 5.5kw 4. Track cutting machine power: 5kw |
| 4 | Haingana | Haingam-pandeha: 0-9m/min (anisan'izany ny totohondry) Haingam-pandeha: 0-12m/min |
| 5 | menaka hydraulic | 46# |
| 6 | Oil Oil | 18# Hyperbolic gear oil |
| 7 | lafiny | Approx.(L*W*H) 20m×2m×2m |
| 8 | Mijoro amin'ny rollers | Roll forming machine for Fundo 2F: 17 rollers Roller iray fanampiny Fundo 1F: rollers 12 |
| 9 | Fitaovana amin'ny rollers | Cr12, quenched HRC56°-60° |
| 10 | Ny halavan'ny workpiece nanakodia | Fametrahana malalaka mpampiasa |
| 11 | Cut style | Hydraulic Tracking cut |
Famokarana mandeha ho azy ny Electric DIN Rail, mampiasa galvanized strip hamokatra.
Automatic size changing Automatic folding automatic transfer and combining Line speed: 20m/min Only need one…
One machine can do different size of beam, save space, save worker, save money, full…
Drip eaves refer to a type of building structure in the construction of a house…
The ceiling keel, which we often see, especially the modeling ceiling, is made of keel…
For: main channel, Furring channel, wall angle and etc. Advantage: 1. Save space, can produce…
Speed: 40m/min 1200(1220) and 600(610) type produced in one machine. Tracking move 5 punch and…
1. High production capacity. 2. independent punching device with servo motor high precision for punching.…
1. 10m/min or 20m/min different speed can be choose. 2. Automatic size changing or Change…