| 장비 구성 요소(1대) | l Double head 3 Tons Manual de-coiler*1 l Feeding guide system*2 l Mainly forming system(Chian driven)*2 l Hydraulic cutting system(Track cutting) *2 l Hydraulic station*2 l PLC Control system *2 l Run out table*2 |
| 재료 | Thickness: 0.3-0.8mm Material: GI, GL. |
| Power supply | 380V, 50Hz, 3 phase(Or customized) |
| Capacity of power | Roll forming machine main power: 5.5kw*2 서보 모터 : 2.2kw*2; 유압: 3.0kw*2; |
| 속도 | 라인 속도: 40m/분 |
| 차원 | 약(L*W*H) 5m*1.5m*1.3m(기계 1대) 총 길이: 디코일러와 수신 테이블을 포함하여 10~12미터입니다. |
| 롤러 스탠드 | 일반적으로 퍼링 12롤러； L 엔젤 9롤러 |
형성 부분의 경우:
| 주전원: | 5.5kw |
| 패널: | 토리스트 스탠드 구조 |
| 성형 속도: | 속도는 40m/min입니다. |
| 샤프트 소재 및 직경: | Shaft material and diameters: #45 steel and 50mm
|
| 롤러 소재: | Cr12 with well heat treatment ,58-62 |
| 형성 단계: | 퍼링 12롤러； L엔젤 9롤러 |
| 주도: | 체인 구동 |
| 절단: | 멈추지 않고 자르다 |
| 전압: | 380V 50HZ 3상 |
Automatic size changing Automatic folding automatic transfer and combining Line speed: 20m/min Only need one…
One machine can do different size of beam, save space, save worker, save money, full…
Drip eaves refer to a type of building structure in the construction of a house…
The ceiling keel, which we often see, especially the modeling ceiling, is made of keel…
For: main channel, Furring channel, wall angle and etc. Advantage: 1. Save space, can produce…
Speed: 40m/min 1200(1220) and 600(610) type produced in one machine. Tracking move 5 punch and…
1. High production capacity. 2. independent punching device with servo motor high precision for punching.…
1. 10m/min or 20m/min different speed can be choose. 2. Automatic size changing or Change…