Guardrail roll forming machine for two waves and three waves as option, the thickness for the guardrail highway roll forming machine is from 2mm to 4mm.
دستگاه رول فرمینگ بزرگراه گاردیل:
ضخامت 2 میلی متر بیشتر برای بزرگراه های سراسری استفاده می شود و با زنجیر حرکت می کند. ضخامت 4 میلی متر بیشتر برای بزرگراه ها استفاده می شود و توسط گیربکس هدایت می شود.
می توان آن را به دیکویلر دو گردنی با حداکثر بار 10 تن مجهز کرد که برای باز کردن کویل راحت است.
Use 2 motors by 22kw, with big power. , shaft diameter is 110mm, roller material is GCR15 with high hardness and long service life.
Adopt pre-punching and pre-cutting technology, high efficiency and saving raw materials
Fully automatic production line, PLC adjustment and control. The process is mature, the production is stable, and the error is small.
Equipped with pre-cutting, saving materials, the length of the finished product is consistent, and the precision is high. Pre-punching is mould punching, and the punching position is accurate. The broken waste will slide down the holes on both sides for easy recycling.
The gear box is matched with universal joint transmission, which has strong power, heavy bearing, faster speed and more stable.