Double out drywall and ceiling channel roll forming machine

PRODUCTS

Double out drywall and ceiling channel roll forming machine

The ceiling keel, which we often see, especially the modeling ceiling, is made of keel as a frame
inquire now

Product Detail

The ceiling keel, which we often see, especially the modeling ceiling, is made of keel as a frame and then covered with gypsum board. Keel refers to the main material made of light steel and used for ceilings.

The ceiling keel system is equipped with a special hoisting system, and the light steel keel used for the ceiling includes a bearing keel, a covered keel, a hanging piece, a pendant, a hanging insert, a bearing keel connector, a covered keel connector, a lifting bar, and the primary and secondary keel is a light steel keel. The aluminum plate is a portal detachable keel system, and each panel can be easily disassembled, assembled and restored. The tubes can be disassembled independently. The boom is Φ8mm, and the surface of the boom and bolt is chemically blackened, and its anti-corrosion performance should be higher than the building standard. The ceiling keel and accessories are made of galvanized steel plate (belt) as raw material (thin-walled section steel produced by cold forming process), and the national standard 1.5mm thick galvanized steel plate (belt) "Bending Test Method for Metal Materials" (GB/T 232-2010), roll forming, forming cross-section size of 15mm×50mm×15mm. Hot-dip galvanizing on the surface of the keel "Technical Requirements and Test Methods for Hot-dip Galvanized Layer of Metal Covering Layer for Iron and Steel Parts" (CB/T13912--2002), the amount of double-sided galvanizing reaches 120 The surface is sprayed with black electrostatic powder.

Machine Parameters

Equipment component(one machine)	l Double head 3 Tons Manual de-coiler1 l Feeding guide system2 l Mainly forming system(Chian driven)2 l Hydraulic cutting system(Track cutting) 2 l Hydraulic station2 l PLC Control system 2 l Run out table*2
Material	Thickness: 0.3-0.6mm Material: GI, GL.
Power supply	380V, 50Hz, 3 phase(Or customized)
Capacity of power	Roll forming machine main power: 5.5kw4 Servor motor: 2.2kw4; hydraulic: 3.0kw*4;
Speed	Line speed: 40m/min
Dimension	Approx.(LWH) 5m1.5m1.3m (one machine) Total length:10-12 meters include the decoiler and receiving table.
Stands of rollers	10-12 rollers

Related Products

Double out drywall and ceiling channel roll forming machine

The ceiling keel, which we often see, especially the modeling ceiling, is made of keel as a frame

Double-out drywall channel roll forming machine 40m/min

For: main channel, Furring channel, wall angle and etc.

Advantage:

1. Save space, can produce at same time, suitable for the small workshop.

2. 40m/min production speed, Hydraulic servo track moving cut, high precision and no speed loss.

3. High Quality, nodular Iron casting structure, Cr12 material High hardness rollers.

70m/min drywall roll forming machine with four punching stations

70m/min drywall roll forming machine with four punching stations, it's the highest configurations in China, and the fastest speed drywall machine in China.

40m/min drywall roll forming machine are poppular

The overall body is well finishing, and the guide torrist structure is strong and durable.

Home

Products

Cases

360° Virtual Tour

News

AboutUs

Contact

SHIJIAZHUANG YINGYEE MACHINERY CO.,LTD

Products

About

Video

+86-0311-85415145
+86 186 0326 5521

info@yingyee.cn

Ms. Jessica Tian