A c purlin roll forming machine connects decoiling, feeding, roll forming, punching, cutting, and profile handling in one production line. These answers help buyers prepare drawings, workshop space, electrical details, and support requirements before ordering.

What equipment is included in the production flow?

The line runs from a decoiler and feeding guide to the main roll forming machine, PLC control system, hydraulic punching, hydraulic cutting, and an output table. The selected configuration can produce C, Z, or U purlins. Send the required profile and hole pattern with the inquiry so the forming and punching arrangement can be matched to the job.

Which coil materials can the machine process?

The compatible materials include steel coil, galvanized steel, PPGI, and aluminum. The material thickness range is determined from the buyer’s drawings. A buyer planning several coil types should provide the material details and profile drawings together, because these details affect the forming arrangement and punching requirements.

How does PLC control fit into the line?

PLC control coordinates the feeding, forming, hydraulic punching, hydraulic cutting, and output stages. Panasonic and Mitsubishi PLC systems are available for the product range. In a workshop, allow space for the control cabinet, hydraulic station, coil loading area, machine body, and finished-profile handling.

Which components should be considered for spare-parts planning?

The line uses hydraulic punching and cutting, chain transmission, rollers, shafts, and a PLC control system. The cutting blade is Cr12 material. The rollers are 45# steel with chrome treatment, and the shaft is 70 mm in 40Cr material. When requesting replacement parts, send the machine configuration, profile drawings, and material range so the parts can match the installed line.

What installation and operating support is available?

Paid local installation service is available. Overseas installation and adjustment service is also described. A manual and user guide are optional when the buyer does not use a site visit or installation service. Confirm the support arrangement, site responsibilities, and required documents before shipment.

What site information should be prepared before placing an order?

Prepare the profile drawings, material type, thickness range, hole layout, cut lengths, power supply, floor space, and finished-product handling route. The machine size is approximately 10 m by 1.2 m by 1.6 m, and the total weight is about 10 tons. The standard electrical specification is 380 V, three-phase, 50 Hz, while voltage can be requested by the customer. Include the required site supply in the inquiry.

For a quotation, send the purlin drawings, material details, hole pattern, cut-length range, site voltage, and planned installation location together.